1.562.949.8625 | www.stronghandtools.com | [email protected] | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 U.S.A.
1
D
E
L1
L2
Q4
S
R2
C
G
F
Q3
Q3
3
Q3
Q1
K
N
R1
4
Assemble the Tool Cart frame by attaching the
vertical and horizontal support assemblies
(D, E)
to
the bottom shelf
(C)
using Flush Shoulder Screws
and Washers
(Q4, S)
.
Install Casters
(L1, L2)
using Hex Nuts
(R2)
.
Attach the top shelf
(B)
to the frame assembly
using Flush Shoulder Screws
(Q4)
Hex Nuts
(R2)
and Washers
(S)
.
Install the Pegboard Panel
(K)
on the front vertical
support bars using Hex Head Bolts
(Q3)
. Prepare
Pegs for installation onto the Pegboard Panel; Place
21 pcs. of Sleeves
(N)
over 21 pcs. of Round Head
Bolts
(Q1)
. Insert into holes on Pegboard Panel, and
fasten to Panel with Hex Nuts
(R1)
.
Q4
S
E
2
B
D
R2
»
Tools required for assembly : wrenches, phillips screwdriver and pliers.
BuildPro
®
Tool Cart
Part No. TMC8080
Assembly Instructions
Attach the Bridge Channel
(F)
to the front vertical
support bars using Hex Head Bolts and Washers
(Q3, S)
. Attach the Rear Slotted Cross Bar
(G)
to
the rear vertical support bars using Hex Head Bolts
and Washers
(Q3, S)
.