Strong SRT40FC4003, Руководство пользователя

Страница: 67 / 170

Subtitle Language Press
pq t u
to select your chosen Subtitle Language , then press
OK
Country This item shows the region you been selected by first time you install the TV.
Restore Factory Default Press pq to select this function, by pressing
OK
and enter the PIN code. You
will reset all the settings contained in the main menu and deleted all installed
channels. TV will go back to
First Time Installation See chapter
3
.
Version Information Your current software version is displayed.
HDMI CEC See chapter
5.7.1
.
Home /Shop Switch between Home modes and Shop modes with default more brightness
and Auto standby to off.
USB Clone This option allows you to copy you channel list to USB device as back up.
Insert USB device and select
Back up . To load this later back into TV, select
“Restore”.
5.7.1 HDMI CEC
CEC Control
Press t u to turn the HDMI CEC
On
or
Off
.
Audio Receiver Press t u to turn the Audio Receiver On or Off .
Device Auto Power Off Press
t u
to turn on this feature. When finished turn off your TV. The
connected device will turn off automatically.
TV Auto Power On Press
t u
to select this option. When finished, turn on the connected device.
The TV will switch on automatically.
Device List Press
OK
to open the main menu of device.
Device Menu
Access the device menu.
6.0 USB
6.1 Reminder when using the USB player
Some USB storage devices may not be compatible to operate smoothly with this TV.
Back up all of the data in the USB storage device in case data is lost due to an unexpected accident.
STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is
consumer's responsibility.
For large file sizes, the loading speed may be slightly longer.
The recognition speed of a USB storage device may depend on each device.
When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode
otherwise the USB storage device or the files stored in it may be damaged.
Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) file
system provided with the Windows operating system. In case of a storage device formatted as a different
utility programme which is not supported by Windows, it may not be recognized.
When using a USB Hard Disk Drive which is not powered independently, ensure its power does not
exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB
Hard Disk and restart the TV system.
An “Unsupported File” message will be displayed if the file format is unsupported or the file is corrupted.
FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
13
English