(QJOLVK
- 23 -
Connect Peripheral
Equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show
you where the different (Optional) equipment
should be connected at the rear side of the
TV.
Via The Euroconnector
Plasma
TV has 2 Euroconnector sockets. If
you want to connect peripherals (e.g. video,
decoder, etc.) which have Euroconnectors to
the TV, use SCART 1 or SCART 2 inputs.
If an external device is connected via the
Euroconnector sockets, the TV will be
switched to AV mode automatically. If the
signal is RGB, select RGB in the source se-
lect menu to view picture. If the external de-
vice is connected to SCART 1, choose
Scart
1 RGB
. If the external device is connected to
SCART 2, choose
Scart 2 RGB
.
Via Ant Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have
Euroconnector, you should connect it to the
ANT input of the TV.
If the VCR is connected via antenna input
it is suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of pro-
grams. Most of them are free, others are to
be paid for by the viewer. This means that
you will need to subscribe to the broadcast-
ing organisation whose programmes you
wish to receive. This organisation will supply
you a corresponding decoder unit to allow
the programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
Connect the decoder to the TV with a
eurocable to
SCART 1
.
TV And Video Recorder
Connect the aerial cables.
Better picture quality can be obtained if you
also connect a eurocable to
SCART
sockets.
Playback NTSC
To use this option you can;
C o n n e c t a n N T S C V C R p l a y e r t o
Euroconnector at the rear side of the TV.
Connect an NTSC VCR player to RCA
Jacks at the rear side of the TV.
Then, press the
SOURCE
button to select
proper source.
Copy Facility
Source selection for
VCR
recording.
Select
options
menu.
Select
scart 2 out
source pressing /
button.
Select
Scart 1
to copy the picture from tuner.
Select
Scart 2
to copy the picture from AV or
SCART 2.
Search For And Store The Test
Signal Of The Video Recorder
Unplug the aerial cable from the aerial
socket
ANT
of your video recorder.
Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
Enter the
tv tuner
menu
in
settings
menu.
Enter the
programming
menu in
tv tuner
menu and select
manual search
.
Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. See
program-
ming
menu. Store the test signal under
programme number 0.
Replace the aerial cable in the aerial
socket
ANT
of your video recorder once
you have stored the test signal.
01-ENG-4205-1546UK-PLASMA BýnT-(3D PANORAMA)(10 PAGE)(SAMV3)-50061377.p65
28.01.2005, 16:05
23
