2
PART 1
3.0 SAfETY NOTES
Use only originally supplied accessories.
Before you make any connections: disconnect your equipment from the 230 V main power to
avoid electric shocks during installation.
Short circuit in the coaxial cable MAY permanently damage your Digital Receiver.
Never install the antenna outside your house or in humid rooms such as bathrooms.
Never use AC adaptors with wrong specifications, this MAY permanently damage your
antenna or Digital Receiver. Always check voltages and polarisation of the adaptor before
connecting it.
4.0 CONNECTING THE ANTENNA
1. Check if the broadcast in your country is horizontal or vertical polarized.
2. Click the antenna in the plastic holder as shown in the pictures
H
V
(H - Broadcast) antenna mounted H
(V - Broadcast) antenna mounted V (Upright)
3. Disconnect your Digital Receiver from the 230 V main power.
4. Connect the supplied coaxial cable to the antenna: carefully press the inner lead of the cable
into the Female-F connector at the back of the antenna. Turn the covering nut clockwise
with your HANDS until it is fixed.
5. Connect the other side of the coaxial cable to your Digital Terrestrial Receiver. Normally
the input connector on your receiver is marked as “ANT” (in) or as “RF” (in). Refer to the user
manual of your Digital Terrestrial Receiver.
6. Connect your Digital Receiver to the 230 V main power.
