Strong SRT 8208, Руководство пользователя

Страница: 22 / 24

Problem Possible cause What to do
No sound on TV or
amplifier.
The volume of the TV is set too low.
The volume of the receiver is set
too low.
Increase the volume of the TV with
its remote control.
Increase the volume of the receiver
with its remote control.
The correct input is not selected
on your TV or amplifier, or the unit
is set to a higher resolution than
supported by the TV.
Switch to the correct TV/amplifier
input.
Select lower resolution on the
receiver.
The TV, digital receiver or amplifier
is not switched on.
Switch the TV/digital receiver/
amplifier on.
The TV or digital receiver is not
connected to the mains.
Check the mains lead.
Bad cable connection. Make sure that any existing digital
or analogue A/V cable connections
between the used equipment (TV,
digital receiver, or A/V amplifier) are
properly connected.
Audio is muted. Press the ! button on your remote
control.
The TV power is off. Turn the TV on.
No access to scrambled
services.
The channel is scrambled.
Your receiver does not support
scrambled channels.
Select an alternative channel.
No response to the
remote control.
The receiver is off. Plug in and turn on the receiver.
The remote control is not aimed
correctly.
Aim the remote control at the IR
sensor on the front panel of the
receiver.
The IR sensor on the front panel of
the receiver is obstructed.
Avoid or remove obstructions.
The batteries of the remote control
are not inserted, wrongly inserted
or exhausted.
Check whether the batteries are
inserted correctly or exhausted. If
exhausted, replace the batteries in
the remote control.
Some models have Front Panel
buttons for CH+, CH- and a Power
On/Off button for simple operation.
After moving the DVB-T2
Receiver to another
room/area you are no
longer able to receive
digital reception.
The antenna signals are too weak. Press INFO on the remote control
to keep the signal bars on screen
and adjust the Indoor antenna for
maximum reception. Alternatively,
do a rescan of the channels.
The signal strength/quality might
be less than before, if using an
indoor antenna.
When using an active antenna,
check if the antenna power setting
is On.
Try using an outdoor antenna.
18