Strong SRT 8150, Руководство пользователя

Страница: 15 / 26

PART 1 • English
13
English
5.3 Installation
5.3.1 Preference
In this menu, you can set up your personal preferences.
n
OSD language, Audio language, Subtitle language
Use
pqtu
buttons select the item and OK button to display the list.
n
Banner Timeout
To set banner duration (how long information banner will be displayed on screen).
Use
pqtu
buttons select the item and OK button to display the list.
n
Transparency
Use pqtu buttons to select the transparency level and
OK
button to display the list.
n
CAM messages
To enable or disable displaying of messages from Conditional Access Module. Disabling of CAM
messages could be necessary in order to not disturb you while zapping through channels which
can’t be descrambled by your smart card.
n
Power On Channel
Use
pqtu
buttons to select the item. If your choice is Fixed channel : press OK button to
display a channel list, select a channel and confirm selection with OK button. Your receiver will
always start with defined channel. If your choice is Last Viewed then receiver will awake with the
last watched channel.
n
S/PDIF
Use
pqtu
buttons to select the Digital audio mode.
PCM – the receiver will downmix AC3 audio to PCM stereo.
Dolby – the receiver will by-pass AC3 audio for future decoding by Digital Audio Amplifier.
5.3.2 TV Setting
In this menu, you can configure the TV setting such as HD type , TV type, Aspect Ratio, Screen Control,
RGB/YUV, Brightness, Contrast, Saturation .
n
HD type
Use
pqtu
buttons to select the item and press OK button to display the list of options, use
pq
buttons to select a video output resolution and press OK button to confirm selection.
Tip : HD type is not selectable if output mode (YUV/RGB) set to RGB .
n
TV Type
Use
pqtu
buttons to select the item and press OK button to display the list of options, use
pq
buttons to select TV Type and press OK button to confirm selection.
Tip : If you have changed TV type and Video on screen not appears in 15 seconds – press
EXIT
button 2 times. Such a problem can appear if your TV do not supports video in
NTSC format.
n
Aspect Ratio
Set accordingly to aspect ratio of your TV.