13
PART 1 • English
English
Auto power down
Auto Power Down
is a new, power saving feature that helps you with reducing power consumption.
It will switch off the receiver when no command is given for at least the set time. Possible settings
are: 1~6 hours with one hour steps and
Disabled.
Once all settings are made, press EXIT to leave the
Time Setting
menu. A confirmation banner will
be shown. Press ok to save your settings or EXIT to discard.
7.2.4 Parental Control
In this menu you can enable or disable the menu lock function and change the PIN code. Use
pq
to
highlight the setting you wish to change and
tu
or [0~9] to change the value of the highlighted setting.
Menu Lock:
If Menu Lock is set to
Enabled
, items in the
Main Menu
are only accessible
after entering the PIN. (Default PIN: 0000) When set to
Disabled
, all menu
items are freely accessible.
Change PIN Code
:
Use this function to set your own personal PIN code. Highlight Change
PIN Code
with
pq
and press ok to advance. A banner with three fields
pops up: Enter your old PIN at
PIN Code
. (Default PIN: 0000) Enter your
new PIN at
Enter New
and again at
Reconfirm
. A successful change of
PIN is confirmed by an on screen message. Use EXIT to go back to the
previous menu.
Once all settings are made, press EXIT to leave the
Parental Control
menu. A confirmation banner
will be shown. Press ok to save your settings or EXIT to discard.
7.2.5 osD Display
This menu allows you to set the OSD (On Screen Display) functionality of your receiver according
to your wishes. Use
pq
to highlight the setting you wish to change and
tu
or [0~9] to change the
value of the highlighted setting. Press ok for a list with all available options for the chosen setting.
Banner Show:
When set to
On
, the info banner displaying channel name, channel
number and Now/Next information will be shown every time you change
channels. To disable the banner, set this item to
Off
.
Banner time (sec.)
:
defines the time after which the OSD banners time out. Possible settings
are:
1~10 seconds.
Transparency
:
Defines how transparent the On Screen Display and banners are. Possible
settings are:
0%, 25%, 50% and 100%.
Once all settings are made, press EXIT to leave the
OSD Display
menu. A confirmation banner will
be shown. Press ok to save your settings or EXIT to discard.
Tip:
For detailed information about the
“Info banner”
please refer to
chapter 6.2 Info Banner
7.3 Channel
Within this menu you can manage channels and configure favourites, play files from a connected USB
storage device and to set timers. The Channel menu consists of the following sub-menus:
Sort and Edit,
Favourite, File Explorer and Timer.
Choose the desired sub menu with
pq
and press ok to advance.
