Strong SRT 6126, Руководство пользователя

Страница: 4 / 33

n
If your dish is aimed at another satellite, you will see the message “ No channels ” this is be-
cause the receiver is set to factory default settings. The default language is set to English,
to choose other languages refer to “
Language settings ” description below.
n
To download the channels, please refer to “ Channel Set-up ”
Note: Every time the receiver asks you to put your PIN code, enter ‘0000’ on your remote control
using [0-9] numeric keypads.
3.1 Language Settings
When you first turn on the receiver, the “ Language Settings ” menu will appear on the screen. To
change the menu language of your receiver, applying the following steps:
n
Select “ Menu Language ”, press OK to choose a language and press BACK to go to main menu.
3.2 Channel Set-up
The channel set-up is for downloading the channels available on the satellites. Please apply the
following steps:
1. Press the Menu button, select “ Installation ”, select “ Channel Set-up ” and press OK .
n
Satellite: Select “ Satellite ” and press OK .
n
LNB: Select “ LNB ” and press OK . In the “ LNB field ”, select one of the available LNB’s.
If you want to set LNB related values, press OK and the LNB Set-up menu will be
displayed. Refer to “
LNB Set-up ” below.
n
Dish Position: Select “ Dish position ” and press OK button. It displays the dish position
of the current satellite. When you use a DiSEqC 1.2 positioner, you can select dish
position in this field. To set a dish position, the status must be “
ON ” (in case the
position has already been set) or “ Off ” (in case the position has not been set).
Note: If in the “ LNB Set-up ” menu described below, the “ LNB Dish ” item is set to “ fixed ” you will not
be able to change the dish position settings in the channel set up menu. Only when you have
selected the “
LNB Dish ” to “ moved ”, you will be able to change the settings in the channel set
up menu.
2. Press
OK
button to set dish position. The “ Positioner Set-up ” menu will be displayed.
n
Frequency, Polarization, Symbol Rate: Shows the transponder (TP) values of the
current satellite. To change the value, select ” Frequency ” and press OK. The list of TP
values of the current satellite is displayed.
n
Scan Mode: Designate channels scanning whether “ FTA ” (Free to Air) only or “ All ”
channels (including scrambled channels)
n
Press Auto Scan (Red Button) to search all the transponders of the selected satellite.
n
After the scanning is finished, press the BACK button to go to view mode.
PART 7 • Quick Set Up Guide • English