Strong SRT 6006, Руководство пользователя

Страница: 9 / 26

PART 1 • English
5
English
2.0 YOUR RECEIVER
2.1 Front Panel
see Fig.1
1. Mode indicator
The RED light indicates that the receiver is in STAND-BY mode.
The GREEN light indicates that the receiver is in AWAKE mode.
2. Power On/Off button
3. Channel Up/Down buttons
2.2 Rear Panel
see Fig.2
1. SAT IN
Connect the digital signal from your LNB on the satellite dish to this connector.
2. SAT OUT
Gives you the possibility to connect an extra receiver (analogue or digital).
3. TV SCART Connector
To connect your receiver to your TV set using a SCART cable.
4. Video RCA Connector
To connect your receiver to your TV set using RCA cable
5. Audio Left/Right RCA Connector
To connect your receiver to your TV set or amplifier using RCA cable
6. RS-232 Serial Port
This serial port can be used to connect your PC with your receiver, to download new
versions of software to your receiver.
7. Power Cord
Your receiver requires voltage of 90~240 V AC (Auto-selectable), 50~60 Hz +/-5%. Make
sure to check the power specification before connecting your receiver to the wall outlet.
8. VCR SCART Connector
To connect your receiver to your video recorder using a scart cable. Your video signal will
now be looped through your receiver to your TV set.
9. S/PDIF Digital audio output
Use this coaxial output to connect your receiver to the input of your digital audio amplifier.
10. Power ON/OFF Switch
Turns the receiver On/Off to Standby