6
2.0 Your DVB-T Receiver
2.1 Front Panel
(Please see inside cover Figure 1)
1. Power Button
Turns the receiver ON/OFF.
2. Stand-BY/ ON/ SIGNAL
(3 LEDs) The red LED is the “stand-by” indicator. The green LED is the “Power
On” indicator. The orange LED lights up once you correctly receive a
terrestrial signal
3. UP/DOWN Buttons
Move the cursor
UP/DOWN
in Menu state. Changes the channels
UP/DOWN
in no menu state.
2.2 Rear Panel
(Please see inside cover Figure 2)
1. ANTENNA INPUT
Connect the antenna cable to this connector.
2. RF OUTPUT
Gives you the possibility to bypass anologue signals from your antenna to
your TV, VCR or another equipment.
3. AUDIO Right (Red RCA) and Left (White RCA
)
These connectors give you the possibility to connect
the audio signal to an external amplifier or to the audio input of your TV.
4. VIDEO
(Yellow RCA) This connector has a constant video signal for additional
VCR-connections.
5. TV Scart Connector
Use this connector to connect your receiver to your TV using a scart cable.
6. VIDEO Scart Connector
Use this connector to connect your receiver to your video recorder using a
scart cable. Your video signal will now be looped through to your TV.
7. RS 232 Serial Port
This serial port can be used to connect your PC to your receiver, and enables
you to download new versions of software into your receiver. Detailed infor-
mation about downloading software into your receiver can be found on our
website (www.strongsat.com).
Note:
It is recommended to ONLY use the original software provided via our website. Loading other versions
of software not adapted to your model number can cause severe damage to your receiver, and will
not be covered by the warranty.
8. S/PDIF
Use this coaxial output to connect your receiver to the input of your digital
audio amplifier.
9. Power Supply:
Connection for external power supply (in the package). Your adaptor needs a
main voltage of 90~240V AC (Auto-selectable), 50~60Hz+/-5%. The receiver
operates with a voltage between 12 / 24 Volts DC. You may use the standard
supplied Cigarette Lighter – Power cord for use of your receiver in mobile
solutions (i.e. camping, boat)
Note:
Please make sure that only the original supplied power adaptor Is used in combination with your receiver.
PART 1 • English
