13
Brightness:
Press
OK
or the
Right
button and select how you want the
OSD to be.
OSD Timeout:
Press
OK
or the
Right
button and select how long you want
the information banner to be on the screen when starting up your receiver
or when changing channels.
LCN Mode (Logical Channel Numbering):
Automatic numbering of channels
through antenna signal. Only usable when broadcaster supports LCN
function. In this case switch LCN Mode
"ON"
.
Note:
When LCN Mode is switched "ON", it disables function described under 5.1.1. "Sorting channels".
2.
Press
BACK
until you go back to main menu.
Time setting:
The system uses GMT (Greenwich Mean Time) as a default. To set the
time, apply the following steps <Please see inside cover Screen 15>:
1.
Select
“Time Settings”
and press
OK
or the
Right
button.
Select GMT usage:
Press
OK
or the Right button and use the
UP/DOWN
buttons to select the GMT usage
"ON"
or
“OFF”
.
"ON"
activates the
selection
"Time Zone"
;
"OFF"
activates
"Set Local Time/ Date"
. Press
OK
to save your setting.
Select Time Zone:
Press
OK
or the
Right
button, and a list of the GMT
plus or minus the hours you need for your country is displayed. Using
UP/DOWN
keys select the correct one, and the receiver will automatically
show the current time in your country. To set the time manually:
Select Set Local Time:
Press
OK
or the
Right
button. Use your
UP/DOWN
buttons or Numeric buttons
[0-9]
to set the local time. When set, press
OK
to save the local time.
Select Set Date:
Press
OK
or the
Right
button and set the date the way
you have set the time.
2.
Press the
BACK
button until you go back to the Main Menu.
Power on Channel:
This function allows you to set the channel you want when the
receiver turns on. To set the power on channel, apply the following steps <Please see
inside cover Screen 16>:
1.
Select Power on Channel and press
OK
or the
Right
button.
Last Viewed:
The receiver will start-up with the channel that you viewed
before turning the receiver off.
Define channel:
This function allows you to set the channel you want when
the receiver turns on. To define the channel, apply the following steps:
1.
Press
OK
or the
Right
button and select in the TV or radio list of
channels the channel you want to have your receiver start-up with.
PART 1 • English
English
Содержание SRT 5120
Страница 1: ......
Страница 3: ...Figure 3...