background image

This symbol is intended to alert
the user to the presence of
insulated  ‘dangerous voltage’
within the products enclosure
that may be of sufficient 
magnitude to constitute a risk
of electric shock 

This symbol is intended to alert
the user to the presence of
important operating and 
maintence instructions
accompanying this product.

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK PANEL)

NO USER SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

Important Safety Instructions

• Power pack to mains power DC 12/24 V.

• All safety and operating instructions should be read before the product is operated.

• All warnings on the product and in the operating instructions should be adhered to.

• Earthing: The antenna cable must be earthed.

• Do not use attachments not recommended by the product manufacturer as they may cause hazards or damage 

to the equipment.

• Do not overload adaptors , wall sockets , extension cables as these can result in fore or electrical shock.

• For cleaning, use only a dry cloth (lightly dampened) Do not use liquid cleaners or aerosol cleaning products.

• Servicing can only be preformed by qualified Service Personnel.

• Do not place this product in unstable position.

The information in this document and the menu structure and the specifications is subject to changed without notice

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Содержание SRT 5005











































Отзывы: