Strong SRT 32HY4002N, Руководство пользователя

Страница: 14 / 26

Before starting the scanning, you can also select Skip scan to skip the initial setup process. In this
case, to search and store your channels you may do an automatic channel search by following the
instructions in the next section
Performing an automatic channel search
.
During the setup, you can follow the hints available at the bottom of the screen to return to the
previous step by pressing
t . Or press
Exit
to exit or interrupt the search halfway.
Once the automatic search ends, the set enters the next step automatically. Press
p q
to select your
location Shop or Home . Press
OK
/
u
to confirm your selection and enter the last step.
In this step, you can press OK to exit the initial setup. The channels are arranged in a preset order. If
you wish to skip channels, modify the preset order or rename channels, select Setup > Organiser and
press
OK
/ u to enter. In this step, you can also press t to return to the previous step.
4.2 Performing an automatic channel search
This section describes how to search and store channels automatically. Instructions are for both
analogue and digital channels. This may be done in any of the cases below:

you have selected
Skip scan
in the initial setup

you see “ Please scan channels
!
” in TV mode

you want to update your channels.
Press
Menu
on the remote control and select Setup
>
Language
>
Menu language . Press
t u
to select
your desired menu language.
Press
Menu to return to
Setup
. Press p q to select
Country
, then press t u to select your country.
The TV installs and arranges channels according to your country. At this step, you will be requested to
enter your password.
Press
p q
to select Tuner mode , then press
t u
to select Antenna or Cable .
Then follow a) or b) below.
a) If you have selected
Antenna
.

Press p q to select Channel install , and press
OK
/ u to enter.

Select Automatic search (
Fig. 7
) then press
OK
/ u to display Automatic search .

Press
OK
to skip the country selection and enter the next step. Or use
t u
to reselect your
country, then press
OK
to enter.

Select
Digital
&
Analogue
or
Digital
or
Analogue
, then press OK / u to start the automatic search,
which relates to all DVB-T digital and/or analogue channels.
b) If you have selected Cable .

Press
p q
to select Channel install , and press
OK
/
u
to enter.

Select Automatic search , then press
OK
/
u
to display Automatic search .

Press OK to skip the country selection and enter the next step. Or use t u to reselect your
country, then press
OK
to enter.

If you select Digital
&
Analogue , then press
OK
/ u to enter. Select your scan mode if available
and configure proper cable information in the same way as in initial setup. Press
p q
to select
Scan and press
OK
/
u
to start your automatic search relating to all DVB-C digital and analogue
channels.

If you select Digital , then follow the same process as above to start your automatic search
relating to all DVB-C digital channels.

If you select Analogue , then press
OK
/
u
to start your automatic search relating to all analogue
channels.
The search may take a few minutes. During the process, you can press Menu to abort halfway.
Once the automatic search ends, press
Menu
to return to the previous step or press
OK
to restart
your channel search.
10
PART 1