Satellite
Select the satellite for this TV.
LNB Type
Make sure the LNB type is corresponding to your dish.
LNB Power
:
Set the power supply for the LNB (usually 13/18 V).
22KHz
Select the 22KHz to set 22K switch to ON/OFF. The Auto mode (recommended) is
used to switch 22KHz on or off depending on the LNB type.
DISEqC1.0/1.1
Select the DiSEqC mode for the selected LNB.
Highlight
Satellite
and press
ENTER
to access the satellite list and select one. Highlight
LNB Type
and
press
ENTER
to select the LNB type. Make sure the
22KHz, DISEqC1.0/1.1
switch is corresponding to the
selected satellite. After the above steps are finished, press the
BLUE
button to search for channels.
5.4.3 DTV Manual Tuning (in DVB-T/C mode only)
Search and store programmes manually.
Select the source type
DVB-T
or
DVB-C
and search digital programmes manually. In the
Channel
menu,
select
DTV Manual Tuning
and press
ENTER
to access. Press
t
u
to select a
Channel No.
, and then press
ENTER
to start the search. The search stops when a programme is found and this programme will be
stored in the current channel position. If you want to stop the search, press
MENU
.
5.4.4 ATV Manual Tuning (in DVB-T/C mode only)
First select the source type of ATV. Then in the
Channel
menu, select
ATV Manual Tuning
and press
ENTER
to access. Highlight and press
p
q
to select
Storage To 1
(maybe other number),
Sound System
and
Channel No.
. Then select search and press
ENTER
to start the search. Press
u
for the unit to search
towards higher frequency. Press
t
for the unit to search towards lower frequency. The search stops
when a programme is found and this programme will be stored in the current channel position. If you
want to stop the search, press
MENU
.
Fine-Tune
Use this option to make small adjustments to tuning of an individual channel. Fine-tune is not
necessary under normal conditions. However, in area of inferior broadcast conditions where adjustments
is necessary for a better picture and sound, use fine-tune. Select a channel that you want to fine tune. In
the
Channel
menu, select
ATV Manual Tuning
and press
q
to highlight
Fine-Tune
. Press
t
u
to fine tune
until the best possible picture and sound are obtained.
5.4.5 Channel settings
Programme Edit
Edit the programmes. You can press the
COLOUR BUTTONS
on the remote
control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing
FAV
.
Signal Information
Showing the information of current DTV channel.
Cl information
Enables the user to select from the CAM-provided menu. Select the
Cl
menu
based on the menu PC card.
5 V Antenna Power
This option is only available in DVB-T source, select
On
to supply power for
the TV’s antenna. Select
Off
to turn off this function.
Software Update (OAD)
Select
On
to allow the TV to update the system software over the air. Select
Off
will turn off this function.*
OAD Tuning
When software update (OAD) is off, this option is disabled. By selecting
OAD
scan
you can scan channels to find the OAD update information.*
*Only for some regions.
13
English
English
