Brightness
Adjust the optical fiber output of the entire picture, it will effect the dark
region of the picture.
Colour
Adjust the saturation of the colour based on your own preference.
Tint
No function
Sharpness
Adjust the peaking in the detail of the picture.
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press
pq
to select
Colour Temperature
, then press
OK
to enter a sub-menu. Press
pq
to select the
relevant picture effect (DEFAULT:
Cold Normal Warm
).
Cold
lncrease the blue tone for the white.
Normal
Increase the neutral colours for the white.
Warm
lncrease the red colour for the white.
5.2.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press
pq
to
select
Noise Reduction
, then press
OK
to enter a sub-menu.
Off
Select to turn off video noise detection.
Low
Detect and reduce low video noise.
Middle
Detect and reduce moderate video noise.
High
Detect and reduce enhanced video noise.
Default
Set as Default.
5.3 Sound menu
Sound Mode
Select your favourite sound mode for each input. Choices are
Standard, Music,
Movie, Sports
and
User
.
Bass
Adjusts the lower frequency of the sound.
Treble
Adjusts the higher frequency of the sound.
Balance
Control the sound balance between the right and left loudspeaker
(earphone).
Auto Volume
Adjust the volume corresponding to the input audio level. Options are
On
and
Off
.
Surround Sound
Turns on the Sound Retrieval System.
AD Switch
Turn on the
Audio
description, you can activate the setting of AD volume.
When turn on the audio description, a narrator will describe what is
happening on the screen for blind or visually impaired viewers. (Only if
available in DTV mode.)
S/PDIF Mode
If you have connected S/PDIF output to digital home audio system. You can
select “Auto” to output Dolby audio automatically. If channel have this audio
channel.
10
