background image

PART 1 • English

3

English

„

„

The cable between the antenna and the Satellite receiver should not exceed 30m as it will 
decrease the quality of the signal. 

„

„

The use non- isolated jacks will result in a loss of the signal level.

„

„

Do not forget to adjust the antenna and the bracket to the cross-polarity (skew angle 
please refer to chapter 3.4 step 4).

„

„

Tighten all the screws of the antenna once you have finished the adjustments.

„

„

This product contains the LNB, it is forbidden to add, change or modify the LNB. 

„

„

For more precise details on the above points or for any information, please ask your 
retailer or customer service.

Warning!!!

Antennas improperly installed to an inadequate structure are very susceptible to 
wind damage. This Damage can be very serious or even life threatening. The owner 
and installer assumes full responsibility that the installation is structurally sound 
to support all loads (weight, wind & ice) and properly sealed against leaks. The 
manufacturer will not accept liability for any damage caused by a satellite system due 
to the many unknown variable applications.

3.0 hoW To iNSTALL?

By following the instructions step by step you can proceed easily to install SLiMSAT by yourself or 
with the help of a professional antenna installer.

Before installing your antenna check that the SLIMSAT box contains all items listed in the chapter 
‘Box Content’. In the event of any missing parts, please contact your distributor.

3.1 Step 1: Where to install?

In order to receive a signal from the Satellite, SLIMSAT is to be installed in an open loop space 
(outside the house or the apartment), in the direction of the satellite towards the equator, for which, 
you will need a compass to exactly orient SLIMSAT toward the satellite (Note; please take reference 
to the table of the Azimuth angles specified in the back pages of this manual)

Note

To ensure accurate compass reading, stay away from large metal objects, specifically 
electrical cables and then make multiple readings

Make sure that there are no obstacles in front of SLIMSAT which can decrease the 
signal reception quality, such as buildings, or trees (you may keep in mind that 
trees will grow and may block the signal).
In order to be able to fix and install your antenna easily you might choose an 
easily accessible place without any potential danger for installation.

Содержание SlimSat SA61






















Отзывы: