Strong Spas WK01S, Руководство пользователя

Страница: 36 / 60

36 www.strongpoolsandspas.com
Cleaning and Care
Cleaning Your Spa
Spa Shell
Each time you drain your spa, before you refill it you
should clean your spa shell with a low detergent,
non-abrasive cleaner specifically formulated to clean
the spa without damaging its acrylic finish.
1. Spray cleaner directly to the spa’s finish.
2. Wipe clean with a soft cloth.
3. Repeat on heavily calcified areas.
4. Wipe spa thoroughly with a wet sponge, rinsing
often in a bucket of clean water.
5. Allow the spa to dry completely.
IMPORTANT: Do not use any of these products on spas
full of water. Only apply to clean, cool, dry surfaces. In-
correct product usage may cause water issues.
Resin Spa Surface
For normal care and cleaning, use a soft cloth or
sponge with soap and water. Rinse well and dry with
a soft, clean cloth.
• Clean grease, oil, paint and ink stains with iso-
propyl (rubbing) alcohol. Rinse well and dry with a
soft, clean cloth.
• Never use abrasive cleaners.
• Do not allow your surface to come into contact
with nail polish, nail polish remover, wintergreen oil
(methyl salicylate), dry cleaning solution, lacquer
thinners, gasoline, pine oil, etc.
• Avoid placing razorblades or other sharp instru-
ments on this surface as they may scratch it. Small
scratches can be removed by buffing lightly with a
clean cloth and using either an automotive polishing
liquid or a toothpaste containing a fine polishing in-
gredient. For deeper scratches, sand the surface
lightly with 400 grit “wet or dry” paper and buff
with fine-grit buffing compound.
Spa Cover and Pillows
Protect spa cover and pillows by applying a spa vinyl
cleaner as part of your monthly maintenance plan. It
is specifically designed to protect spa covers and pil-
lows from chemical and ultraviolet light damage
without leaving an oily residue behind.
Warning: Do not use automotive vinyl protectants on spa
covers or pillows. These products are generally oil-based
and will cause severe water clarity issues that are diffi-
cult to correct.
Important! Keep the spa covered when not in use!
• Covered spas will use less electricity in maintaining
your set temperature.
• Covering your spa will protect your spa’s finish
from the sun’s ultraviolet rays.
• You are required to keep the spa covered to main-
tain warranty coverage.
• Covering your spa helps prevent children from
drowning in the spa. See the photo for instructions
on mounting the locks and how to lock and unlock
the cover.
• In addition, while a soft spa cover is rigid, it is not
designed to support any weight. Therefore, as a
safety precaution and to preserve the life of your
cover, you must not sit, stand, or lie on it, nor
should you place objects of any kind on top of it.
Jet Removal and
Replacement
1. Rotate the jet face counterclockwise.
2. Continue to rotate the jet as you pull it out of the
jet well.
To replace jets, insert the jet in the jet well and push
and rotate it clockwise until you feel it snap into po-
sition. When the jet face can be rotated freely, it is
properly seated.
1. 2.