Stromag EDB Series, Инструкция по монтажу

Страница: 66 / 104

2.7.5 Environmental protection/recycling
ENVIRONMENTAL HAZARD
Indicates environmental hazards as well as measures for environmental protection.
RECYCLING
Indicates measures for recycling or disposal of components as well as auxiliary and operating materi-
als.
2.8 Safety devices on the clutch
The clutch does not have any safety devices of its own.
After assembly according to applicable national guidelines, the clutch must be provided with housing or separat-
ing protective equipment by the manufacturer of the complete machine.
Operation of the clutch without separating protective equipment or proper housing is not permitted. At the same
time the clutch must also be sufficiently ventilated, e.g. via a perforated or grid plate.
2.9 Safety symbols/pictograms on the clutch
The clutch does not have any safety symbols/pictograms.
2.10 Wear personal protective equipment
Personal protective equipment must be worn for all work to be carried out, see section 2.7.3. The wearing of
personal protective equipment must be monitored by the operator. It may be the case that the operator has to
meet additional measures.
2.11 Basic responsibilities of the operator and personnel
The following basic responsibilities of the operator and personnel must always be observed when handling the
clutch:
• After assembling the clutch, a risk analysis of the workplace must be carried out by the operator on the com-
plete machine. In addition to the documentation, operating instructions must be created.
• In addition to the documentation, observe and instruct adherence to general legal and other binding regula-
tions on accident prevention and protection of the environment. Such obligations can also, for e.g., affect the
handling of hazardous substances or the provision/wearing of personal protective equipment.
• Supplement the documentation with your own instructions, including supervisory and reporting obligations for
specific operational matters, e.g., with regards to the organisation of work, work sequences and appointed
personnel.
• Never make changes or additions to the clutch, nor clutch conversions, without the manufacturer's approval.
If any changes are made to the coupling that impair safety, they must be reported to Stromag immediately.
• Only use genuine spare parts.
8
Mounting instructions Electromagnetic multi-disc clutch EKE/EKB, EDE/EDB • No. 500-00000 C • 10/2017