Strobies Pro-flash TLi-N, Инструкция по эксплуатации

Страница: 12 / 16

Wireless Control Function
The flash unit is built in with a Wireless Control Port so that you
can wirelessly adjust the power level of the flash and the flash
triggering. To control the flash wirelessly, you need
the
Transmitter and Receiver for Pro-Flash TLi-C/TLi-N
(STR249)
.
Insert the rece into the Wireless Control Port on the flash
and insert the transmit iverer into the camera hot shoe.
Settings made on the hotshoe-mounted transmit er
will be wirelessly communicated
to the flash
through the receiver . Then you
can press the camera shutter
release button to trigger
the flash. You can also hold
the transmit
er by hand to
control your off-camera flash.
Other Applications
●
When the flash unit receives wireless signals, is shown
on the LCD display.
For full instructions on the use of
STR249 , see its user
manual.
●
Sync Triggering
The Sync Cord Jack is a Φ2.5mm plug. Insert a trigger plug here
and the flash will be fired synchronously with the camera shutter.
Modeling Flash
If the camera has a depth-of-field preview button, pressing it will fire
the flash continuously for 1 second. This is called modeling flash.
It enables you to see the shadow effects on the subject and the
lighting balance. You can fire the modeling flash during wireless or
normal flash shooting.
●
To avoid overheating and deteriorating the flash head, do
not fire the modeling flash for more than 10 consecutive
times. If you fire the modeling flash 10 consecutive times,
allow at least 10 minutes’ break for the camera flash.
Auto Focus Assist Beam
In poorly-lit or low-contrast shooting environments, the built-in auto
focus assist beam will automatically light on to make it easier for
autofocus. The beam will light up only when autofocus is difficult
and get out as soon as the autofocus becomes correct.
●
If you find the auto focus assist beam does not light up,
this is because the camera has a correct autofocus.
Position
Center
Periphery
Effective Range
0.6~10m / 2.0~32.8 feet
0.6~5m / 2.0~16.4 feet
Bounce Flash
By pointing the flash head toward a wall or ceiling, the flash will
bounce off the surface before illuminating the subject. This can
soften shadows behind the subject for a more natural-looking shot.
This is called bounce flash.
To set the bounce direction, hold the flash head and turn it to a
satisfying angle.
360
-7-90
- 19 - - 20 -
●
If the wall or ceiling is too far away, the bounced flash might
be too weak and result in underexposure.
The wall or ceiling should be a plain, white color for high
reflectance. If the bounce surface is not white, a color cast
may appear in the picture.
●