Strobel VEB 200-2, Инструкции механика

Страница: 15 / 54

11
MA_VEB200-2_A3_210511_en.doc
3.1.3 Setting the stitch plate (Fig. 1)
The theoretic needle radius of 41,3 mm should be 0,03 mm to 0,05 mm larger at the
left needle guide, 0,01 mm smaller to 0,01 mm larger at the needle glide plate and
0,10 mm to 0,12 mm larger at the right needle guide.
The settings should be realized with a gauge. Deviations may deteriorate the sewing
result considerably and may cause damages or pre-mature waste of the sewing tools.
3.1.4 Replacing the needle glide plate (Fig. 3)
Loosen screw (2) to remove the needle glide plate (1). When re-mounting the needle
glide plate make sure that it fits closely to the stitch plate bridge.
Fig. 3