Strobel 441-1, Инструкции механика

Страница: 47 / 66

43
MA_441-1-2_A1_180830_en
Procedure to save the change
- Select parameter F-401
- change value to "1"
- Save the data by pressing the "P" key twice and exit the supplier level.
- Switch the control box off and on again so that the change is saved.
4.17.6
Here is a description, how to copy the sewing programs from a control box to a
USB stick and then transfer them to another control box.
Copy sewing programs to another machines (Class 441-2)
Procedure with control panel V850
1.
- Insert the USB stick into the control box
Copy the sewing program from the controller
- Press the "P" key and switch the control box on at the same time
- Enter code 3112 and confirm with key "E"
- Select parameter F-514 and confirm with "E"
- Press the "F2" key
- Press the "E" key twice
- Then the file with the sewing programs is copied to the USB stick
- Press the "P" key and switch off the controller
- Now you can remove the USB stick from the control box
The file name, which is copied to the USB stick, is titled by the controller
"0300DATA.pay". This file can be renamed up to 8 characters, but the
extension always must be ".pay".
Example:
0300DATA.pay =>> shoe-1.pay
2.
- Insert the USB stick into the control box
Copy the sewing program to a control box
- Press the "P" key and switch the control box on at the same time
- Enter code 3112 and confirm with key "E"
- Select parameter F-515 and confirm with "E"
- Press the "F2" key
- Select the sewing program (for example, shoe -1.pay) using the
+/- buttons on the control panel
- Press the "E" key twice
- File with the sewing program is up-loaded in the control box
- Press the "P" key and switch off the controller
- Now you can remove the USB stick from the control box