Strobel 327D, Руководство по эксплуатации

Страница: 27 / 38

23
BA_327D_A2_200715_en.doc
4.7.2 Digital stitch depth display (Fig. 12)
The plunger height can be read off digitally from the stitch depth display. This makes
finding earlier adjustments substantially easier by frequently changing sewing material
thickness.
The current supply is via a 9 V battery in the housing. To prevent premature
discharging of the battery, the display should be switched off with the toggle switch at
the housing during longer work breaks and when finishing work.
Always valid: Small number - thin sewing material
Large number - thick sewing material
The adjustment of the stitch depth by one digit (= 1 point of the display unit) is equal
to a plunger height modification of 0.01 mm.
When turning the regulating button to the right to the stop a value between 003 and
006 appears on the display.
Fig. 12
4.7.3 Changing the battery (Fig. 12)
-
Switch the toggle switch to position 0
-
Release 4 cheese-head screws with cross-slot at the back of the housing
-
Change battery. ATTENTION! Take note of polarity.
-
Reassemble in reverse order.