Strobel 327D, Руководство по эксплуатации

Страница: 16 / 38

12
BA_327D_A2_200715_en.doc
The cotton stand is mounted at the back on the right on the table plate after assembly
of the individual parts. (Fig. 1)
Check all screws at the frame for tight fit and retighten if necessary.
Mount the position transmitter and adjust corresponding to point “3.4.2 Positions of
the machine“.
A T T E N T I O N !
Prior to commissioning the machine it must be checked whether
the electric connection data on the type plate of the motor,
especially the network voltage and the frequency, are according
to the data of your current network.
A T T E N T I O N !
The machine must be oiled before first start. The maintenance
instructions according to the operating instructions must be
followed!
Fig. 2