Strobel 3200D series, Руководство по эксплуатации

Страница: 17 / 40

13
BA_3200D_A1_140203_en
Fig. 4
3.3.2 Positions of the machine
C A U T I O N ! Danger of injury!
Danger of pulling in parts of clothing and of hair and danger
of crushing fingers and stitching fingers with needles!
When checking positions with switched-on machine keep
fingers and hands away from moving parts.
Machine with or without pneumatic:
The machine requires a needle position and depending on the sewing drive,
possibly also a reference position.
Reference position (if necessary, i.e. sewing drive DC1500-ST220A):
The reference position must be set in such a way, that the point of the
needle in direction of the insertion stitch closes with the (inner) edge of the
needle slide plate.
Needle position (with stop in and outside the seam:
The needle position needs to be set in such a way that when the machine
is at standstill and the lifting is open the tip of the needle points in the
direction of the stitch and the plunger, transporter, and presser plate are at
one level (the position is located at about 8 mm after the upper needle
turning point).
Notes for sewing drives which have two needle positions:
The needle position mentioned above is position 2 at the sewing drive.
The position 1 at the sewing drive should be set in such a way that when
the machine is at standstill the tip of the needle stands about 3 mm in the
direction of the stitch after the lower needle turning point.