Page 2
Remove locking tab on the Key if
you wish to create a disassemblable
joint. This is best done with a sharp
utility knife.
OPTIONAL
6
Striplox™ and Joinlox® are trademark and patent protected internationally.
Installation Guide Mini 120 - Metric V2.0
B
*C
B
A
Direction
Indic. Load Capacity
A
200 kg
B
146 kg
*C
119 kg
•
Tested using MDF and fixed with glue.
• *C is in direction of lock-up.
Load Capacity
A
B
7
Assembly components remembering the Key only
needs to travel 1 pitch for full engagement. This is
detailed in steps A and B.
Before assembling the Striplox Mini 120, make note of
the locking tab on the Key. Leaving this tab in place will
prevent the unintentional unlocking of the joint.
X
Y
Align Marks
Note the offset of the lugs on the Key body, length X is
larger than Y. Insert the Hook into the Key with the longer
X end towards the face to be pushed during assembly.
To complete the assembly push the end of the
substrate (with X offset) until the Mini 120 is fully
engaged.
A
B
