
10
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: XQB60-M933 PRODUCT CODE: 49831 11/2015
Getting Started: Installation
Unpacking
• This product has been packaged to protect it against transportation damage. Keep
the original packaging carton and materials in a safe place. It will help prevent any
damage if the product needs to be transported in the future. In the event it is to be
disposed of, please recycle all packaging materials where possible.
• Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
• Unwind the power cord to its full length and inspect it for damage. Do not use
the appliance if the appliance or its cord have been damaged or are not working
properly.
In case of damage, contact our after sales support line for advice on
examination, repair or return of the damaged product.
• Read this manual to familiarise yourself with all the parts and operating principles
of the washing machine. Pay particular attention to the safety instructions on the
previous pages.
Installing the bottom cover
Levelling the washer
• Install the washer on a stable and level
surface, in a dry location, out of sunlight.
• If levelling is necessary, adjust the
adjustable leg (at the front right side of the
machine), as illustrated, right.
The maximum permissible inclination
of the supporting surface is 2 degrees.
CAUTION:
If you must install the washer on
a carpeted floor, make sure not to block the
ventilation openings on the bottom of the washer.
• Make sure the power cord is unplugged from the
mains supply.
• Place some padding (such as a soft mat, blanket or
thick towel) on the floor and gently lay the washing
machine on the padding, back side down. Take care
not to dent the housing.
• Insert the bottom cover into the hooks of the leg,
pushing it straight until it reaches into the front hooks.
• Fasten the bottom cover with the supplied screw.
• Carefully set the washer upright.
Bottom
Cover
Back
Leg
Screw
Front
Base of the Washer
(3) Tighten
(1) Loosen
(2) Down
(4) Up
Adjustable Leg