02
STRIKEMASTER
®
LITHIUM 24v BATTERY
QUICK START
STRIKEMASTER LITHIUM 24v 4AH BATTERY
1.
Remove StrikeMaster Lithium 24v Battery from carton (Image 1).
2. Unpack Battery Charging base and plug it in. Slide Battery onto Battery Charging Base
using the channels on both sides as a guide. Press down until you hear it click in place.
Leave Battery on Battery Charging Base until fully charged (Image 2).
NOTE
:
Battery is not fully charged when first removed from box.
3. When Battery Charging Base indicator shows solid green, your Battery is
fully charged (Image 3).
4. Once Battery is fully charged remove from Battery Charging Base. Slide battery onto
the StrikeMaster Lithium 24v Powerhead using the channels on both sides as a guide,
pressing down until you hear it click in place (Image 4).
Your StrikeMaster Lithium 24v Battery is ready for use.
BATTERY CARE AND MAINTENANCE
1. Store Lithium Ion Battery in a warm, dry location (35°F/ 2°C – 100°F/ 38°C).
2.
IN SEASON
a. Keep Battery fully charged.
b. Store Battery in a warm, dry location. (35°F/ 2°C – 100°F/ 38°C).
EXTREME COLD WEATHER OPERATION
The Lithium-Ion Battery can be used in temperatures down to (-4°F/ -20°C). If your Battery is not performing correctly, put the
Battery on the Powerhead, free spin auger out and above ice for 30 to 90 seconds depending on how cold the unit is
(the colder the unit, the more time to warm up). After this sequence the Battery will warm up and begin operating normally.
NOTE
:
Always store Battery in a warm location.
3.
OFF SEASON
a. Charge Battery to full.
b. Store Battery in a warm, dry location (35°F/ 2°C – 100°F/ 38°C), off of Battery Charging Base.
c. If Battery is stored for a period longer than 6 months, Battery should be recharged back to full before use.
REGISTER YOUR PRODUCT ONLINE TO ACTIVATE YOUR WARRANTY
www.strikemaster.com/warranty
IMAGE 1
IMAGE 3
IMAGE 2
IMAGE 4
for
use
with
strikemaster
®
4ah
battery
charging
base
(LtV-cb)
onLy
.
