How to identify your parts and fixings
All our products have four attachment methods. These are colour coded, at the end of
each part you will find a marker pen marking either RED, WHITE or BLUE (two types)
RED MARKING/FIXINGS
The part will have a red marker pen marking on the end.
Hole / Bolt configuration:
One large dowel hole - Place for large dowel
One small hole - Place for large 90cm confirmation bolt
D
Areas this method is used:
Top front and back guard rails and top headboard facia
WHITE MARKING/FIXINGS
The part will have a white chalk marking on the
end.
Hole / Bolt configuration:
TWO large dowel holes - Place for large dowel
Areas this method is used:
Bottom front and back guard rails and centre
headboard facia
SIDE RAIL MARKING/FIXINGS
The part will have a blue marker pen marking on
the end.
Hole / Bolt configuration:
TWO large dowel holes - Place for large dowel
One small centre hole - Place for large 90mm
connector bolt C
Facing access hole - Place for barrel bolt B
BLUE MARKING/FIXINGS -
The part will have a blue marker pen marking on
the end.
Hole / Bolt configuration:
TWO large dowel holes - Place for large dowel
One small centre hole - Place for large 90mm
connector bolt D
