R&E Stricker Reha-Entwicklungen GmbH
7
Additional operating instructions Neodrives
Battery and charger
7.2 Attaching the battery
Place the battery [1] on the battery rail [6] mounted
on the handbike. Push the battery [1] to the front
edge of the battery rail [6] as shown in the diagram.
Lock the battery [1] by gently turning the key [2]
clockwise until it stops. The battery can now no
longer be removed from the battery rail. Remove
the key [2] from the battery [1]. (
).
Fig. 5: Insert battery into battery rail
Insert the plug [7] of the cable coming from the
motor into the socket [3] on the battery [1]. The
correct alignment and locking of the two parts is
done automatically by a magnetic lock. Before
inserting the plug [7] into the socket [3], make sure
that both parts are clean and that there are no
metallic particles in them. If these are present, they
must be removed with a clean, dry cloth (
Fig. 6: Establish cable connection
Switch off the handbike at the sMMI. Then pull the
plug of the motor cable [7] out of the socket [3] .
Make sure that the plug of the motor cable [7] does
not come into contact with any metallic particles
when it is removed (risk of contamination). (
Fig. 7: Disconnect cable connection
Insert the key [2] into the lock on the battery [1].
Turn the key [2] counterclockwise until it stops.
The lock is now released and the key can no longer
be removed from the battery. Pull the battery [1]
approx. 2 cm upwards along the rail [6] and then