R&E Stricker Reha-Entwicklungen GmbH
5
Additional operating instructions Lipo Smart
Operation
Fig. 1: Battery
Fig. 2: Lipo Smart control unit „
ON
“ position
6.1.2 Lipo Smart Para
On the left ergo grip you will find the thumb
throttle for speed control above the grip surface.
Depending on the version, you can use the thumb
throttle to drive 6 or 25 km/h without cranking
assistance. If you start cranking, the thumb throttle
is deactivated. You can now set the speed using
the control on the handlebar. The handbike will
then travel at the set speed regardless of how hard
you crank.
The brake lever on the left ergo handle
automatically interrupts the electronics of the
drive when actuated. Therefore, you cannot
simultaneously operate the left brake lever and
accelerate with the thumb throttle. The brake lever
also has a locking mechanism. Use this to use the
brake as a parking brake.
The brake lever on the right ergo handle has no
breaker contact. You can use the right brake lever
to start uphill.
Always use both brake levers for braking.
6.1.3 Lipo Smart Tetra
You can adjust the speed via the control knob to
the chin control.
For easier starting, press the button of the starting
aid for one second. The handbike then supports
the starting process for two seconds with the
preset speed setting.
The Lipo Smart has a coaster brake. Activate it by
turning the cranks of the handbike backwards. The
exact function of the coaster brake is explained in
the general instructions for use in chapter.
If your Lipo Smart Tetra is equipped with thumb
throttle in addition to the speed control for chin
control, this functions according to „
6.1.4 Starting uphill
If you have stopped on an incline and want to start
again, you may roll backwards and not be able to
start. To be able to start despite the incline, lean
forward to put more weight on the front wheel.
Press and hold the left brake lever. Now carefully
accelerate at the same time. Reduce the pressure
on the brake as you slowly apply more throttle.
