INSTRUCTION
5
1. Connect the receiver with your home stereo system or car stereo system via the 3.5mm audio
cable/ adapter.
2. Pair the receiver with your phone.
3. Now you can enjoy your music through the home stereo system or car stereo system.
If you want to use it with a car stereo system, you need to make sure your car audio player has an
aux-in port
You must charge the receiver fully before using the receiver for the first time.
1. Connect the USB charging cable to the USB chargeport of the receiver. Do not use charger over 5V
to charge the product, it may destroy the product.
2. The light indicator will turn into red when charging.
3. It takes about 1.5 hours to fully charge the device.
4. The red light indicator goes out when charging is completed.
Power on:
Press the multifunction button about 3 seconds until the blue and red indicator lights
start flashing alternately.
Power off:
Press the multifunction button for about 3 seconds until the blue indicator light goes
off.
When the alert tone sounds every minute and the indicator light turns into red, indicating that the
battery has run out, needs to charge it as soon as possible.
REMARK
CHARGING THE RECEIVER
LOW-VOLTAGE ALERT
POWER ON/OFF THE RECEIVER