strex SP227, Руководство пользователя

Страница: 40 / 52

STEP 1: See chapter “METHODE OF CONNECTION” for more details.
STEP 2: Turn on the power switch located at the backside of the Battery Charger.
0 = OFF
1 = ON
STEP 3: The screen is flashing (Standby mode).
STEP 4: Press the BATTERY TYPE selection button to select the battery type.
STD, GEL, and AGM are cyclically selected. The default setting is STD.
Battery type Display
GEL gel sealed lead-acid battery
STD standard lead-acid battery
AGM absorbent glass mat
When selecting the battery type, the charger will first display the charging voltage of the
corresponding battery type for 5 seconds and then display the battery voltage value. The
battery type needs to be selected before starting charging, and cannot be selected after starting
charging.
If you want to re-select the battery type, then you need to press the
CHARGE START/STOP
button to stop charging before making a new selection.
STEP 5: Press the CHARGING CURRENT LEVEL selection button to select the required charging
current. Select the required charging current gear according to the size of the battery. The 12V
system has three options of 5A/10A/25A, and the 24V system has two options of 5A/10A.
The charging current can be switched during the charging process. When the current is selected,
the machine will first display the corresponding current for 5 seconds and then display the real-
time charging current.
STEP 6: After the setting is completed, press the CHARGE START/STOP button to start charging,
or you can wait for one minute after the setting is completed, and the machine will automatically
start
charging.
40