Page 2
How to Use the StressVest® Suicide Vest
1. Power on the StressVest® Suicide Vest Flashbox and the two speaker units by
pressing and holding the power button for a few seconds until the status light
is illuminated. The StressVest® Suicide Vest is ready to be activated. To turn off,
press and hold the power button on the flashbox and speakers until the status
light is off.
2. Activate the StressVest® Suicide Vest by pressing the Push Button Activator.
The StressVest® Suicide Vest will produce a realistic audible pipe bomb sound
with a bright light flash for auditory and visual effects.
WARNING: Do not activate and flash the LED lights near the eyes. It may hurt the eyes.
3. During the activation, the StressVest® Suicide Vest will register a hit to any StressVest®
within its set “kill radius” range of 0-100ft (RF MODE). F
or some closed room, close quarter
scenarios, the FLASH MODE produces a short invisible IR light flash to activate StressVests® panels
within line of sight to a range of approximately 15 feet.
5. To integrate StressVest® Face Sensor (sold separately), connect the green connector to the
StressVest® Suicide Vest Flashbox’s Face Sensor connector (input).
Face Sensor
connector (input)
Pain penalty or vibration
IR Flash
or
RF Signal
4. When a StressVest® Face Sensor is connected to the StressVest® Suicide
Vest, the StressVest® Suicide Vest power/battery status light will turn blue for 10
seconds once the Role’s Player’s Face Sensor is hit with an IR laser. The Push Button
Activator will not activate the Suicide Vest while the status light is blue.