EN
- Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working conditions and the
work which needs to be done. Using a power tool in ways for which it was not intended can lead to
potentially hazardous situations.
5) SERVICE
- Your power tool should be serviced by a qualified specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
BEFORE START-UP ,NOTE THE FOLLOWING
！
- The pump can be connected to any shock-proof plug which has been installed according to regulations ,The
plug must have a supply voltage of 230V
～
50Hz.Fuse min.6Amp.
CAUTION
！
When the pump is to be used near swimming poor or garden pond sand in their area of protection, it
must be equipped with a ground-fault circuit interrupter with a nominal trip current of max.30mA
(according to VDE 0100,part 702 and 738).
The pump must not be operated while people are in the swimming poor or in the garden pond
！
Please
contact your electrician
！
ATTENTION
！
(Important for your own security)Before starting running your new submersible pump, please have the
following items checked by an expert:
- Ground connection
- Zero conductor
-
Fault current breaker switch must correspond the safety regulations of the power plants and they must
work faultlessly.
- The electrical connections must be protected from moisture.
- If there is danger of loading, the electrical connections must be taken to higher ground.
- Circulation of aggressive fluids, as well as the circulation of abrasive materials must be avoided at all costs.
- The submersible motor-driven pump must be protected from frost.
- The pump must be protected from running dry.
Access on the part of children should also be prevented with appropriate measures.
- The pollution of the liquid may occur due to leakage of lubri
CONSISTENCY
:
Your submersible pump is designated for the circulation of water with a maximum temperature of 35
℃
。
This pump may not be used for other fluids, especially motor fuels, cleaning fluids, and other chemical
products
！
INSTALLATION
:
The submersible motor pump is installed as follows:
- In a stationary position with fixed pipeline
Or
- In a stationary position with a flexible hose pipe
