Note:
1. The truck shall be used, serviced and repaired according to the
manufacturer’s requirements
.
2. The truck shall not be modified or have attachments fitted without ensuring that the truck is still safe.
1
．
Applicable Range
1.1 Hand pallet truck is a low lift transportation tool which is limited to move palletized cargo. This kind of
truck possesses the feature of stable lifting, easy operation, safety and reliability etc.
1.2 The working place must be non-slip, hard and flat ground without holes or obstacles.
1.3 The ambient lighting is 50 lux at least.
1.4 The turning radius is 1265-1335mm.
2
．
Main parameter
Capacity
2000 kg
Total lift height
190 / 200 mm
Lowered fork height
75 / 85 mm
Height of handleless
385 / 395 mm
Fork length
1100 / 1150 / 1220 mm
Width over the forks
520 / 550 / 685 mm
Steering wheel
Ф
160 / 180 mm
Fork wheel
Ф70
/ 84 mm
Noise Lever
<70 dB
Truck weight
53~56 kg
3
．
Assembly of hand pallet truck
3.1 Please refer to Fig.1, and pull out the pin shaft 23
Fig.1
Fig.2
3.2 Insert Handle Tube 8 into Position A. Connect Handle tube 8 and the pump body 31 via the pin shaft 23.
3.3 And then put the spring pin 24 through the pin shaft 23 to get fixed.
3.4 Cross the chain 10 of the Handle Tube through the hole of the pin shaft 23. Please refer to Fig.2.
Fig.3 Fig. 4
3.5 Put the Screw and nut at the end of chain 10 into the slot of the lever plate 52. Please refer to Fig.2 and
Fig.4.
3.6 Refer to Fig.3, raise handle 8 to a horizontal position, pull out pin B and keep it appropriately to be used
for Handle replacement next time. The assembling is completed.
