Strend Pro CMX12, Инструкция по эксплуатации

Страница: 20 / 33

(GB) ENGLISH
14. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
15. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and
binding of moving parts; any broken parts or mounting fixtures and any
other condition that may affect proper operation. Any part that is damaged
should be properly repaired or replaced by a qualified technician. Do not
use the tool if any switch is not turn On and Off properly.
16. Guard against electric shock. Prevent body contact with grounded surfaces
such as radiators, ranges and refrigerator enclosures.
17. Replacement parts and accessories. Parts replacement should be done by
technician. When servicing use only identical replacements. Only use
accessories intended for use with this tool.
18. Keep safe clearance around mixer. Keep all persons (except operator) a
minimum of six feet from the mixer during operation.
19. Do not overload mixer. An overload could damage equipment.
20. Do not move mixer during operation. The mixer could tip over or the motor
could be damaged.
21. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determinate if your judgment or reflexes
are impaired while taking drugs. If there is any doubt, do not operate the
tool.
Note: Performance of this tool may vary depending on variations in local line
voltage. Extension cord usage may also affect tool performance. Do not use too long
wires and with small diameter min 2,5mm². When using different wires it may occur
voltage drop.
Warning:
The warnings, cautions and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.