EN
- A correct operation of the appliance is obtained when the radiator is installed vertically. Do not switch on
the fan heater near pieces of furniture, curtains, shelves, etc.
- Do not use the appliance near liquids or inflammable matters.
- The appliance must not be located immediately below a socket outlet.
- In order to avoid overheating, do not cover the heater
- In case the power cord is damaged, send it to the nearest after sale service recommended by the
manufacturer for the replacement.
- This appliance is not intended use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not connect the appliance to extension cords or multiple outlets.
- Do not damage and do not kink the power cord.
- Before cleaning the appliance or carrying out any maintenance switch off the whole system.
- If the appliance is out of work switch it off without tampering it, if any repair is required please contact only
the after-sale centers approved by the manufacturer and ask for original spare parts. Otherwise safety of the
appliance can be compromised.
- Do not use this heater with a programmer, timer or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
COMPONENTS
1) Body frame
2) Base plate
3) Screw (2pcs)
4) Tip-over safety switch rod
5) Power cord
ASSEMBLY
Assemble the body frame and the base plate together as the following sequences
Remove the screws from the lower part of the body frame.
Insert the power cord through the slot placed in the middle part of the basement and then assemble the
body frame to the base plate.
Secure the body frame to the base plate by means of the two screws previously removed. Insert the power
cord through the suitable slots and then fix it by the clamp.
OPERATION
Plug in the appliance. Check that the outlet has at least a 10AMPERAGE current carrying capacity.
Models with switches
Select the speed by suitable switches. Press the oscillating switch to make the radiator oscillate. Press it again
to switch off the oscillating movement of the appliance.
SAFETY DEVICE
This appliance is provided with safety devices disconnects the appliance when the radiator is tilted or when
is tipped by means of a switch situated in the lower part of the radiator.
