EN
- Do not use accessories that are not recommended by the manufacturer. Using the wrong accessories can
endanger the user and seriously damage your device.
- If any fault is detected (e.g. unusual noise or the smell of burning), switch off the radiator immediately and
disconnect it from the power supply!
- The radiator is filled with the exact amount of special oil. Repairs requiring the oil container to be opened
should only be carried out by an authorized workshop.
- When disposing of the device, follow the instructions for proper oil disposal.
- Protect the radiator from dust, steam, sunlight and direct heat radiation!
(*) Authorized service: The manufacturer's or importer's service department or another person who is
qualified, authorized and qualified to perform this type of repair. The radiator must be handed over to such
a workshop in the event of a repair.
OPERATION
ASSEMBLY:
1.
Unpack the casters and castor holder from the box.
2.
Place the radiator upside down on a horizontal solid surface.
3.
Attach the castors to the radiator using the castor holder. Connect the front castors between the first
two fins of the radiator, the rear castors between the last two ribs.
4.
Screw the castors to the radiator using the wing nut.
5.
After mounting the castors, turn the radiator to the upright position. The correct position of the
radiator is shown in the figure below.
USE:
- Before each use, always make sure that the radiator cover is undamaged and correctly mounted.
1.
1. Place the radiator in an upright position on a flat, stable and heat-resistant surface. Make sure that
there are no flammable materials at a distance of 1 m from the radiator. Any other use is considered
dangerous.
Use the radiator only in an upright
position and with mounted castors. Any
other use is considered dangerous.
