EN
Usage:
- Check the convector to make sure it is not damaged in any way.
- Do not use a damaged convector and have it repaired by an authorized service center.
- Connect the convector to the power supply. Before connecting the convector to the power supply, make sure
that the voltage in your electrical socket corresponds to the data on the rating plate of the appliance.
- Set the ON / OFF switch to the ON position. The display shows the current room temperature.
- Set the desired temperature.
- The room thermostat will keep the room temperature at the set value by automatically switching on and off.
- Do not leave the house during operation. Before leaving, make sure that the appliance is switched off and
unplugged from the power supply.
- Always disconnect the heater from the power supply if you will not be using it for a long time.
A – Main switch
B – Temperature sensor
C – Display
D – Display (Temperature increase / decrease
buttons)
E – ON / OFF switch
F – Button for timer setting and WI-FI
G –Wi-Fi Indicator
H –
Timer indicator
