LED bicycle light
EN 55015:06+A1:07+A2:09
EN 61547:09
EN 61000-3-2:06+A1:09+A2:09
EN 61000-3-3:08
DESCRIPTION:
Authorized manufacturer
representative
Packaging materials are recyclable. Please do not
dispose of the packaging material in your household
waste, but hand it in at the secondary collection point.
A financial contribution has been made for the
recovery and further recycling of the container.
EXPLANATION OF SYMBOLS:
Protection class III.
The product complies with the applicable European
directives and the conformity assessment method of
these directives has been implemented.
Do not dispose of as normal household waste.
Instead, contact your recycling center in an
environmentally friendly way. Please take care
of environmental protection.
Protection degree IPX0
IPX0
IP44
Protection degree IP44
HEADLIGHT
TAILLIGHT
POWER INPUT
3 W
1,5 W
LIGHT SOURCE
XPE
LED
LIGHT INTENSITY
80 lm
COLOR TEMPERATURE
6 500 K
800 K
LIGHT PERFORMANCE AT FULL
POWER
4 h
2,5 h
COVERAGE
IP44
IPX0
PROTECTION CLASS
III
MATERIAL
Si ABS
ABS
DIMENSIONS
60 x 38 x 37 mm
70 x 38 x 50 mm
WEIGHT
33 g
34,5 g
BATTERY/ ACCUMULATOR
3,7 V 350 mAh
charging �me: 3 h
2 x AA (not included)
HEADLIGHT:
- Attach the headlight to the bicycle
TAILLIGHT:
1. Open the battery cover.
2. Insert 2 new AA batteries of the same brand according to
the polarity diagram shown on the inside of the battery
compartment.
3. Close the battery cover.
4. Attach the taillight to the bicycle seat.
WARNINGS:
1. Do not short circuit the battery terminals.
2. Do not mix new and old batteries. Use only alkaline batteries or rechargeable batteries.
3. If the device is not used for a long time, remove the batteries.
4. Do not dispose of batteries in a fire.
5. Do not dispose of damaged or discharged batteries in normal waste but take care of the environment and return them to battery
recycling sites.
6. Keep batteries out of the reach of children
USE:
