- On lawnmowers with self-propelled, release the self-propelled lever before starting the engine.
- Never transport the lawnmower while its engine is running.
- Stop the engine and disconnect the spark plug in the following cases:
•
when performing any task whatsoever under the mowing deck or in the rear grass ejection chute.
•
when performing maintenance, repairs or inspecting the machine
•
before carrying, lifting or transporting the lawnmower.
•
when you leave the lawnmower without supervision or you are getting ready to adjust the mowing
height.
•
before removing and emptying the grass catcher.
- When an impact with a foreign object occurs, stop the engine and carefully inspect to ensure that there is
no damage.
- In the event of damage, take the lawnmower to an authorized service centre for repairs.
- ATTENTION!
The mowing blade continues to rotate for several seconds after the engine is turned off.
- If the lawnmower is vibrating abnormally (immediately identify and remedy the cause of the vibration).
- For the purpose of ensuring safe operation, regularly check that the pins, bolts and nuts on the lawnmower
are securely tightened.
- ATTENTION: FUEL IS A VERY FLAMMABLE LIQUID.
- Store fuel in a suitable container.
- Only add fuel in an open and well-ventilated location.
- When handling with fuel, do not smoke or use a mobile phone.
- Only add fuel when the engine is turned off. Never open the fuel tank or add fuel if the engine is hot or if it
is running.
- WARNING!
Immediately clean any traces of fuel that have spilled on the machine or on the ground and do
not start the engine until the fuel has completely evaporated.
- Do not start the lawnmower where you refueled. Make sure that the gasoline lawnmower is at a sufficient
distance from the place where you refueled (minimum 3 m).
- After adding fuel, securely tighten the fuel tank cap and the cap on the fuel canister.
-
ATTENTION
: Before carrying out maintenance or repairs, stop the engine and disconnect the spark plug.
ASSEMBLY AND OPERATION
UNPACKING
- Unpack the packaging and choose from it all parts that are supplied with the mower (e.g. instructions for
use, etc.) and store them in a safe place.
- Remove the lawnmower from the package and check that there are no parts left in the package.
- If any damage or missing parts are found, do not use the device and contact your dealer or authorized
service center.
- Before assembling and starting the gasoline lawnmower, read carefully the entire instructions manual and
the instructions in them.
ASSEMBLY
IMPORTANT INFORMATION:
The lawnmower is supplied
WITHOUT FUEL AND OIL
in the engine. The
lawnmower was tested at the production plant meaning that a small amount of residual oil may be in the
engine.
Assembling the handle
- Carefully unfold the handle of the lawnmower, taking care not to damage the control cables of the mower.
1. Insert the bottom part of the handle into the respective hole on the lawnmower and secure in place with
4 screws (two screws on each side of the handle).
2. Attach the top part of the handle to the bottom part of the handle using the included screws with the
quick coupler and wing nuts.
