Streifeneder Go.adventure 5A440, Инструкция по эксплуатации

Страница: 18 / 40

18/40
4.3 Dynamic customisation
Desired result Adjustments during
customisation Components
exchange
Harder toe
response Tilt the foot in direction plantar
fl exion or move the load line to
the rear –
Softer toe
response Tilt the foot in direction dorsal
extension or move the load line to
the front –
Harder heel
response Tilt the foot in direction dorsal
extension or move the load line to
the front Insert heel wedge
(see pt. 6)
Softer heel
response Tilt the foot in direction plantar
fl exion or move the load line to
the rear Remove heel
wedge
(see pt. 6)
5.1 Demounting / Mounting of the Foot Shell
Use the 5M400 mounting horn to put the foot shell on / off. The mounting
horn makes it easier to slide the prosthetic foot into the foot shell.
5 Technical Notes
5.2 Demounting
During demounting, the heel should
hang over a table edge. This helps to
lever the heel out of the foot shell and
therefore makes it easier to take it off.