Replacing the Fuse in the 12v Adapter
1. Twist off the upper cover of the 12V adapter tip.
2. Remove the faulty fuse.
3. Insert a new fuse of the same type (spare fuses are included in the
case)
4. Twist the cover back onto the Adapter.
Troubleshooting
Specifications
Problem
Possible Solution
The Impact Wrench will
not start
Check if the vehicle battery is dead
Check if the 12V socket is faulty
Check the fuse in the 12V Adapter of the wrench
A wheel nut cannot be
unscrewed or tightened
Check that the correct rotation direction has been
selected
Voltage
12v DC
Power Draw
8 Amp
No Load Speed
5000 RPM max
Max Torque
271 ft-lb
Fuse Rating
15A, 250V
Square retainer diameter
1
/
2
” (12.7 mm)
Included Socket
Diameters
11
/
16
”,
3
/
4
”,
13
/
16
”, 7/8”
(17 - 19 mm, 21 - 23 mm)
SWTOOL8 Manual AW:Layout 1 5/8/13 12:00 Page 7
