5
How to Assemble the Streetwize
Hydraulic Motorcycle Jack
The instructions below explain how you need to assemble the Streetwize
Hydraulic Motorcycle Jack.
1. Remove the jack and its components from its packaging and dispose of
the packaging in the correct manner.
2. Install the hydraulic unit onto the motorcycle jack base unit and secure
it using the two M8 x 25mm bolts and washers.
See figure 1 below.
3. Then position the hydraulic ram found on the top of the hydraulic unit
into the lifting frame. To do this, lift the Lift Saddle
(see figure 2)
, so you
can insert the hydraulic unit’s ram into the frame.
fig. 1
fig. 2
