TO PREVENT DAMAGE AND THE RISK OF FIRE, ELECTROCUTION OR INJURY,
PLEASE READ AND OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
USING THE POLISHING MACHINE.
• Use the polishing machine only in a clean and dry environment.
• The polishing machine should be placed on the polishing surface before
being switched on or off.
• Keep children away by taking the appropriate precautions.
• Ensure the switch is in the off-positions before plugging in. Avoid
switching on the machine on inadvertently.
• Do not keep your finger on the switch when carrying the connected
polishing machine from one place to another.
• Always unplug at the mains before changing the polishing cap or carrying
out repairs.
• Never carry or pull the machine by its power cable.
• Protect the cable from heat, oil and sharp edges.
• Check the cable for breaks before each use.
• Do not exert too much pressure when polishing, but simply allow the
polishing machine to glide over the polishing surface.
• Check the housing and switch for damage.
• Do not use the polishing machine if the housing or switch is defective.
• The A-weighted equivalent continuous sound pressure level at the user’s
ear lies below 70 dB(A).
SAFETY INSTRUCTIONS
WHEN USING ANY WAX AND POLISHES, PLEASE OBSERVE THE
MANUFACTURER’S INSTRUCTIONS.
• For less accessible areas (such
as wing-mirrors, bumpers and
door handles etc) remove the
polishing cap from the pad and
polish these areas by hand.
• Now replace the textile
polishing cap with the fine
polishing cap and pull this over
the polishing pad. Make sure
it is completely clean. Remove
the layer of polish in the same
order as it was applied.
• Work next on the smaller
surfaces (doors, for example).
Allow the mains cable to hang
from the appliance and hold the
polishing machine as illustrated.
