HOW TO USE YOUR BLASTER BRUSH
l
Mix car shampoo and warm water in a bucket to generate plenty of foam.
l
Connect your Blaster Brush to a garden hose with (standard) hose
connector (A). Ensure water flow is OFF (B).
l
Twist (C) and adjust the telescopic pole to the desired length and re-tighten
to secure.
l
Tum on the tap and set the switch on your Blaster Brush to ON (B). Spray
away surface dirt, debris and grime.
l
Switch OFF (B). Dip the brush in soapy water and wash your car (or other
item) one section at a time, working from the top, down. Wash the tyres
and rims last.
l
After washing each section, immediately switch ON (B) for a blasting
rinse to avoid soapy streaks.
TIPS FOR THE PERFECT WASH EVERY TIME
l
Do not clean with very hot water as this may damage the bristles.
l
Only use a quality high foam car shampoo - and use plenty!
l
Avoid cleaning with dishwashing liquid or detergent.
l
Before use, it is essential to ensure bristles are FREE from grit to
avoid scratches.
l
Avoid leakage by ensuring all parts are securely screwed together before turning on the tap.
l
Avoid using water pressure that is too high.
l
Always give the car a blasting rinse first before brushing.
l
After use, rinse bristles thoroughly under running water to remove excess soap.
l
Store standing upright to avoid bristle damage. Make sure switch is set to ON.
Read and understand these
instructions before attempting
any operation of this Blaster
Brush/Broom and retain for
future reference!
A
B
C
D
This Combination Kit Consists of:
1. Blaster Brush II Head.
2. Blaster Water Broom Head.
3. TELESCOPIC Aluminium Pole.
4. Easy Glide ON/OFF Switch.
5. Universal Hose Connector.
SWCWB6
Ideal to...
SWCWB6-Manual.qxp_Layout 1 19/03/2018 10:08 Page 2
