Interface Index
fig.6
fig.7
6
Song 1
Song 2
There is two different ways to connect the Bluetooth feature for STREET HOPPER 8.
Bluetooth direct
connect from the STREET HOPPER 8, or
Bluetooth connect
via
the Discolor Dj App.
Note:The STREET HOPPER 8 can be connected to both Bluetooth direct and the
Discolor Dj App at the same time.
Bluetooth direct
will be used to playback any
music media and apps, such as Pandora, You Tube, your music player etc. All
control of the music media will be controlled through their prospected app controls.
For
Bluetooth connect
from the Discolor Dj App you will have full remote control
of the STREET HOPPER 8 features, playback controls, volume & EQ as well as
lighting control.
1. Turn on Bluetooth via your device settings,
locate and pair to STREET HOPPER 8.
2. Verify that your device is connected to
the STREET HOPPER 8device.
3. Download the FREE Discolor DJ App in
your App Store and install it.
4. Now activate your application and
select Bluetooth symbol.
5. Select STREET HOPPER 8 APP
to connect via the applicatiom.
NOTE:
This is a sample interface, the interface may vary
depending on your certain device.
Conectividad App/Bluetooth
1
STREET HOPPER 8 APP
STREET HOPPER 8
STREET HOPPER 8
STREET HOPPER 8
Song 1
Song 2
fig.8
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions
(1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
