Street Guardian SGGCX2PRO+, Руководство пользователя

Страница: 6 / 27

1. Once a suitable mounting location is decided secure the DVR
mount bracket to the windshield using the provided 3M adhesive
tape, ensuring the window is clean prior to application, remove the
backing tape and press and hold the bracket firmly against the glass
for 2 minutes, then wait 20 minutes before attaching the camera.
The 3M adhesive tape will achieve 50% bond after 20 minutes, 100%
bond is achieved after 72 hours, if the camera is attached to the
mount bracket too soon after installation the adhesive may not bond
correctly to the glass.
[Note] The cables should be connected to the camera before
attaching the camera to the mount bracket, when determining the
mounting location be sure to leave adequate room above the camera
to be able to detach the camera while the cables are in place.
2. Fix the power and GPS cables properly and route cables across the
passenger side where possible to prevent the line of sight from being
affected.
3. Insert the USB connector of the vehicle charger into the USB
interface of the DVR before attaching the camera to the bracket.
4. Your camera may be supplied with an on glass GPS antenna or a
dashtop GPS antenna. The GPS should be mounted correctly
according to which type of GPS antenna you have.
[Note] If installing the optional rear camera cable determine which of
the available cables is the most suitable for your installation type,
with all cable routing it is important to take note of any pillar or side
curtain airbags, cables must be installed so as not to interfere with
the operation of these safety systems, if in doubt please seek
professional installation.