Low profile mount bracket with 3M adhesive
– used for installation
of camera to window and allow camera to detach.
12v~24v power cord
– approved power supply to suit, use of non-
approved power supplies may damage your camera and could void
warranty.
Android compatible memory card reader
– regular USB car reader
functionality for SD and Micro SD memory cards, may also be
connected to supported Android mobile phones and tablets to
access files directly from the memory card.
Windscreen cleaning wipe
– used to clean the window prior to
mounting the brackets to ensure a good bond for the 3M tape,
surfaces must be clean and dry prior to application.
Trim pry tool
– helpful during installation to lever interior trims to
run cables.
GPS adapter cable
– interface cable required for the (optional) GPS.
Cable clips
– may be useful in some installations to secure wiring.
Audio recording warning stickers
– some locations require all parties
to be notified of audio recording, check local laws. Audio may also be
turned off in the menu or via the MIC key when recording.
Spare 3M tape for mount
– die cut replacement 3M tape to suit
mount brackets.
Microfiber carry bag
– will help protect camera from getting
scratched when transporting outside of the vehicle.
String for bracket removal
– used to cut through 3M tape if needing
to remove the bracket.
Quick start guide
– basic starter instructions.
