Street Guardian sg9665gc, Руководство пользователя

Страница: 8 / 33

Settings
The DVR is pre-set with logical default settings and is ready to
operate with minimal adjustment required, when powered on the
internal capacitors will charge, the DVR will then power up and
recording will commence.
[Note] The DVR does not contain a battery and will need to be
connected to a power source to configure settings, connecting to a
computer USB port is not supported.
Before using the DVR it is important to adjust the time and date
settings, if using GPS the time and date will be updated automatically
however the
Time Zone
offset will first need to be configured
according to your region.
If not using GPS the time and date settings will need to be manually
configured, to set the time and date manually connect the DVR to
power, stop any active recording by pressing the
REC
key then press
the
MENU
key twice to enter the second page of the
SETUP
menu,
press the
Mic
key to scroll down to the
date/tIME
menu, press the
OK/lock
key to enter, (the
MIC
and
REC
keys will scroll up or
down), press the
menu
key to advance to the next setting and
adjust accordingly, press the
ok/lock
key to save and exit.
[Note] If you are in a region that supports daylight savings offset it
will be necessary to adjust the time (or time zone if using GPS) at the
beginning and end of the period accordingly.